--- title: "Pallet Racks in Asheboro, NC | Greensboro Rack" url: https://greensboropalletrack.com/service-area/asheboro description: "Compare new selective and cantilever storage in Asheboro. Plan production loads, capacities, aisles, free CAD drawings, and managed installation." lang: en --- Image: Pallet rack systems arranged for warehouse storage (https://greensboropalletrack.com/assets/hero-warehouse-UDtk90RH.jpg) Greensboro Pallet Rack (https://greensboropalletrack.com/products) # Pallet Racks in Asheboro, NC Pallet racks in Asheboro, NC should separate raw materials, work in process and long production stock. Commerce Place, I-73/I-74 and US-220 serve manufacturing storage in older buildings with 18–25-foot clear heights and close column grids. (336) 594-4387: 3365944387 ## Warehouse racking for production inventory in Asheboro Pallet racks in Asheboro, NC can organize raw material, work in process, and palletized goods into storage suited to each load. Greensboro Pallet Rack supplies new warehouse pallet racks selected from dimensions, weights, and the intended retrieval method. Begin by describing the product at the point it enters storage. A wrapped pallet, a long component, and a case-picking task do not necessarily need the same support arrangement or access pattern. Convert that starting comparison into a measured layout rather than assuming every load belongs in the same repeating bay. Usable height, column positions, and the handling envelope should guide how the different storage functions are assigned. Selective pallet racks provides direct pallet access and is a useful comparison when several materials or product stages occupy the same area. Identify which loads must be independently retrievable before considering deeper lanes. The storage pattern should follow the access requirement rather than the apparent similarity of the pallets. Different contents can impose different weights, dimensions, or picking priorities even on the same base. Build a load schedule that preserves those differences. Record maximum loaded dimensions, pallet construction, and the heaviest intended weight for each load family. Include overhanging packaging in the measurements. Avoid averaging a heavy load into a much larger group of lighter pallets, because the occasional heavy unit still needs an opening whose beam and support arrangement are appropriate to it. For your Asheboro layout, compare pallet rack systems (https://greensboropalletrack.com/products/pallet-rack), pushback rack (https://greensboropalletrack.com/products/pushback-rack) and pallet flow rack (https://greensboropalletrack.com/products/pallet-flow-rack), with your Asheboro move supported by our warehouse relocation service (https://greensboropalletrack.com/warehouse-relocation). ## Pallet rack systems with clear capacity limits Beam-pair capacity applies to the intended load at each individual level. The frame must be assessed for its height and beam spacing as a separate but related requirement. Keep the proposed bay elevations with the weight schedule during review. A beam rating without the intended configuration cannot describe the complete capacity of the storage arrangement being considered. When pallet racks receive several pallet constructions, review decking and support needs alongside the capacity selection. The most common pallet should not conceal another pallet with different bearing requirements. Use load plaques that correspond to the agreed configuration. Clear documentation allows the operating limits to remain tied to the specified arrangement rather than becoming an estimate passed along without the design context. ## Industrial pallet racks and cantilever choices Cantilever is worth reviewing for long material that is not suited to conventional pallet openings. The support format differs from a beam-supported bay, so the product description needs to include how the material bears and how it is handled. Compare the load form first. Length alone is not enough to choose the support capacity or establish the complete storage arrangement. Keep carton-level tasks separate from full-pallet storage. Carton flow shelving serves case picking, while pallet flow concerns pallet movement and follows a first-in, first-out sequence. Pushback operates last-in, first-out. These distinctions help assign a storage method to an actual task rather than grouping products by name or assuming every flow arrangement provides the same kind of access. ## Documenting the layout and installation work Truck information, clear height, columns, and room measurements are the starting inputs for free CAD drawings. Add the loaded pallet envelope so aisle planning reflects the actual movement task. The forklift lifting limits also belong in the elevation review. Count storage positions after these handling constraints are considered, not before them, so the result describes locations that can be served. An itemized quote can show the material selected for the positions, height, beam capacity, and decking, together with freight and installation. We schedule and manage experienced installation crews for the defined scope, with lead time confirmed through the quote. If the project involves connecting new material to an existing arrangement, provide labels and connection photographs instead of assuming teardrop compatibility from appearance. Moving inventory beyond Asheboro? Compare our service areas (https://greensboropalletrack.com/service-area) and arrange warehouse moving services (https://greensboropalletrack.com/warehouse-relocation) with the receiving schedule for your Asheboro operation. ## Pallet Rack Questions for Asheboro ### Should long production material go on cantilever? ### How do I rate a level holding different pallet weights? ### What is needed to plan the truck aisles? ## Pallet Rack Systems for Your Inventory ### Pallet Rack Direct access to each pallet for mixed SKUs. Beam pairs and frames sized to your heaviest load. https://greensboropalletrack.com/products/pallet-rack ### Pushback Rack Two-to-six-deep LIFO lanes for repeat pallets of a SKU, served from one working aisle. https://greensboropalletrack.com/products/pushback-rack ### Pallet Flow Rack FIFO pallet lanes with separate loading and picking faces for dated inventory. https://greensboropalletrack.com/products/pallet-flow-rack ### Drive In Rack Deep lanes for bulk inventory with few SKUs. Lane clearance matched to pallets and lift trucks. https://greensboropalletrack.com/products/drive-in-rack ### Cantilever Rack Open-front storage for lumber, pipe and long materials. Arms sized for load length and weight. https://greensboropalletrack.com/products/cantilever-rack ### Carton Flow Rack Gravity-fed case picking with replenishment from the rear and cartons presented at the pick face. https://greensboropalletrack.com/products/carton-flow-rack ## Plan Your Asheboro Rack Layout Send your pallet sizes, loads and clear height for a free CAD layout and itemized quote. (336) 594-4387: 3365944387 Call Now: 3365944387 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://greensboropalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://greensboropalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Asheboro", "item": "https://greensboropalletrack.com/service-area/asheboro" } ] }, { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://greensboropalletrack.com/#business", "name": "Greensboro Pallet Rack", "alternateName": "Greensboro Pallet Rack — A Division of Warehouse Equipment & Supplies Co.", "url": "https://greensboropalletrack.com", "telephone": "(336) 594-4387", "hasMap": "https://maps.google.com/maps?q=7800%20Airport%20Center%20Dr%2C%20Unit%20E%2C%20Greensboro%2C%20NC%2027409&z=17&iwloc=A&output=embed", "address": { "@type": "PostalAddress", "streetAddress": "7800 Airport Center Dr, Unit E", "addressLocality": "Greensboro", "addressRegion": "NC", "postalCode": "27409", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "High Point, NC" }, { "@type": "City", "name": "Winston-Salem, NC" }, { "@type": "City", "name": "Kernersville, NC" }, { "@type": "City", "name": "Burlington, NC" }, { "@type": "City", "name": "Mebane, NC" }, { "@type": "City", "name": "Colfax, NC" }, { "@type": "City", "name": "McLeansville, NC" }, { "@type": "City", "name": "Graham, NC" }, { "@type": "City", "name": "Thomasville, NC" }, { "@type": "City", "name": "Lexington, NC" }, { "@type": "City", "name": "Asheboro, NC" }, { "@type": "City", "name": "Archdale, NC" }, { "@type": "City", "name": "Reidsville, NC" }, { "@type": "City", "name": "Liberty, NC" }, { "@type": "City", "name": "Rural Hall, NC" }, { "@type": "City", "name": "Clemmons, NC" }, { "@type": "City", "name": "Mocksville, NC" }, { "@type": "City", "name": "Salisbury, NC" }, { "@type": "City", "name": "Durham, NC" }, { "@type": "City", "name": "Hillsborough, NC" }, { "@type": "City", "name": "Danville, VA" }, { "@type": "City", "name": "Martinsville, VA" }, { "@type": "City", "name": "Eden, NC" }, { "@type": "City", "name": "Statesville, NC" }, { "@type": "City", "name": "Siler City, NC" } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Should long production material go on cantilever?", "acceptedAnswer": { "@type": "Answer", "text": "Cantilever is a useful option to compare when long material does not suit pallet openings. Supply its dimensions, weight, support requirements, and handling method. Palletized units may still belong in selective storage, so the product form and placement task should guide the choice rather than length alone." } }, { "@type": "Question", "name": "How do I rate a level holding different pallet weights?", "acceptedAnswer": { "@type": "Answer", "text": "Use the combined intended load on that beam pair and retain the heaviest pallet in the design information. Frame capacity also depends on height and beam spacing. The completed configuration and its load plaques should reflect those requirements rather than a general average weight for the inventory." } }, { "@type": "Question", "name": "What is needed to plan the truck aisles?", "acceptedAnswer": { "@type": "Answer", "text": "Provide the truck type and operating information along with the full loaded pallet dimensions. The required space must accommodate approach and placement, not just straight travel. Include column locations on the sketch so free CAD drawings can compare storage positions against the actual movement envelope. For the Asheboro plan, allow roughly 12–13 feet for counterbalance equipment, 8–10 feet for reach trucks or 5–6 feet for very-narrow-aisle equipment, then verify the specific truck requirement." } } ] } ] ```