--- title: "Pallet Racks in Liberty, NC | Greensboro Rack" url: https://greensboropalletrack.com/service-area/liberty description: "New pallet racks and cantilever storage for Liberty battery-supplier parts. Send loads and clear height for a free CAD layout and itemized quote." lang: en --- Image: Pallet rack systems arranged for warehouse storage (https://greensboropalletrack.com/assets/hero-warehouse-UDtk90RH.jpg) Greensboro Pallet Rack (https://greensboropalletrack.com/products) # Pallet Racks in Liberty, NC Pallet racks in Liberty, NC should give heavy component pallets direct access and defined support. The Greensboro-Randolph Megasite, US-421 and Julian Airport Road serve EV battery manufacturing near older industrial buildings with split-level docks. (336) 594-4387: 3365944387 ## Selective pallet racks for component access in Liberty Pallet racks in Liberty, NC should be selected around the heaviest pallet, its support points, and the truck that will place it. Greensboro Pallet Rack supplies new warehouse pallet racks for layouts where component access matters as much as storage density. Start with loaded pallet dimensions rather than an empty pallet footprint, then separate bulky parts from repeatable unit loads. Translate your own handling requirements into a product schedule before choosing beam lengths or row arrangements. A drawing should explain which loads belong in each storage area and how operators reach them. Selective warehouse racking allows direct access to individual pallets when part families have different replenishment patterns. Choose bay widths by comparing loaded pallet widths, required separation, and the handling space needed at the uprights. A ninety-six-inch beam can accommodate two forty-inch pallets, while a one-hundred-forty-four-inch beam can hold three when the complete configuration is suitable. The longest beam is not automatically the right choice: its specified capacity must match the weight carried by that level. Keep irregular loads out of a standard bay until their bearing surfaces are understood. Pallet overhang, wrap, and protruding components belong on the dimension sheet, not in an assumption made after installation. For your Liberty layout, compare pallet rack systems (https://greensboropalletrack.com/products/pallet-rack), pushback rack (https://greensboropalletrack.com/products/pushback-rack) and pallet flow rack (https://greensboropalletrack.com/products/pallet-flow-rack), with your Liberty move supported by our warehouse relocation service (https://greensboropalletrack.com/warehouse-relocation). ## Cantilever rack for long components A cantilever rack is worth evaluating when long components cannot sit securely between conventional uprights. Record the full load length, weight distribution, and the points at which the material can bear on arms. Do not select arm spacing by appearance or treat a bundle as evenly distributed without checking it. Separate long-stock retrieval from ordinary pallet picking so that one handling method does not obstruct the other. Compare single-sided and double-sided arrangements against available access rather than filling every open edge. Where palletized cartons accompany long items, warehouse pallet racks can remain the more practical companion system. The aim is a defined storage method for each load shape instead of forcing incompatible products into one bay pattern. ## Industrial pallet racks and load selection Capacity for industrial pallet racks is stated per beam pair at each level, not per individual beam. Add the weights of every loaded pallet sharing that pair and identify the heaviest intended combination. Frame capacity requires a separate check because upright height and the spacing between beam levels affect the assembly. Changing a level later can change what the frame can carry, even if the beams stay the same. Request load plaques that correspond to the approved arrangement and keep load information with the drawing. Decking must also suit the supported load; a deck does not remove the need to verify beam capacity or turn an irregular base into a properly supported pallet. ## Measurements, drawings, and installation scope Document usable clear height, pallet lift height, truck turning requirements, and overhead obstructions before settling on the rack elevation. The forklift must handle the intended load at the intended height; reach alone does not establish suitability. A forty-two-inch frame is the normal starting point for a forty-eight-inch pallet, subject to the actual support arrangement. Your measurements and CAD planning can turn this information into a layout for review. Ask for an itemized quote separating material, decking, freight, and installation so that alternatives remain comparable. Greensboro Pallet Rack uses experienced installation crews we schedule and manage. Confirm the final equipment list and any lead time in the quote rather than treating a preliminary layout as a delivery commitment. Moving inventory beyond Liberty? Compare our service areas (https://greensboropalletrack.com/service-area) and arrange warehouse moving services (https://greensboropalletrack.com/warehouse-relocation) with the receiving schedule for your Liberty operation. ## Pallet Rack Questions for Liberty ### How do I specify capacity for heavy pallets? ### Which rack type suits long parts? ### What changes the project cost? ## Pallet Rack Systems for Your Inventory ### Pallet Rack Direct access to each pallet for mixed SKUs. Beam pairs and frames sized to your heaviest load. https://greensboropalletrack.com/products/pallet-rack ### Pushback Rack Two-to-six-deep LIFO lanes for repeat pallets of a SKU, served from one working aisle. https://greensboropalletrack.com/products/pushback-rack ### Pallet Flow Rack FIFO pallet lanes with separate loading and picking faces for dated inventory. https://greensboropalletrack.com/products/pallet-flow-rack ### Drive In Rack Deep lanes for bulk inventory with few SKUs. Lane clearance matched to pallets and lift trucks. https://greensboropalletrack.com/products/drive-in-rack ### Cantilever Rack Open-front storage for lumber, pipe and long materials. Arms sized for load length and weight. https://greensboropalletrack.com/products/cantilever-rack ### Carton Flow Rack Gravity-fed case picking with replenishment from the rear and cartons presented at the pick face. https://greensboropalletrack.com/products/carton-flow-rack ## Plan Your Liberty Rack Layout Send your pallet sizes, loads and clear height for a free CAD layout and itemized quote. (336) 594-4387: 3365944387 Call Now: 3365944387 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://greensboropalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://greensboropalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Liberty", "item": "https://greensboropalletrack.com/service-area/liberty" } ] }, { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://greensboropalletrack.com/#business", "name": "Greensboro Pallet Rack", "alternateName": "Greensboro Pallet Rack — A Division of Warehouse Equipment & Supplies Co.", "url": "https://greensboropalletrack.com", "telephone": "(336) 594-4387", "hasMap": "https://maps.google.com/maps?q=7800%20Airport%20Center%20Dr%2C%20Unit%20E%2C%20Greensboro%2C%20NC%2027409&z=17&iwloc=A&output=embed", "address": { "@type": "PostalAddress", "streetAddress": "7800 Airport Center Dr, Unit E", "addressLocality": "Greensboro", "addressRegion": "NC", "postalCode": "27409", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "High Point, NC" }, { "@type": "City", "name": "Winston-Salem, NC" }, { "@type": "City", "name": "Kernersville, NC" }, { "@type": "City", "name": "Burlington, NC" }, { "@type": "City", "name": "Mebane, NC" }, { "@type": "City", "name": "Colfax, NC" }, { "@type": "City", "name": "McLeansville, NC" }, { "@type": "City", "name": "Graham, NC" }, { "@type": "City", "name": "Thomasville, NC" }, { "@type": "City", "name": "Lexington, NC" }, { "@type": "City", "name": "Asheboro, NC" }, { "@type": "City", "name": "Archdale, NC" }, { "@type": "City", "name": "Reidsville, NC" }, { "@type": "City", "name": "Liberty, NC" }, { "@type": "City", "name": "Rural Hall, NC" }, { "@type": "City", "name": "Clemmons, NC" }, { "@type": "City", "name": "Mocksville, NC" }, { "@type": "City", "name": "Salisbury, NC" }, { "@type": "City", "name": "Durham, NC" }, { "@type": "City", "name": "Hillsborough, NC" }, { "@type": "City", "name": "Danville, VA" }, { "@type": "City", "name": "Martinsville, VA" }, { "@type": "City", "name": "Eden, NC" }, { "@type": "City", "name": "Statesville, NC" }, { "@type": "City", "name": "Siler City, NC" } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How do I specify capacity for heavy pallets?", "acceptedAnswer": { "@type": "Answer", "text": "Give us the maximum loaded pallet weight and how many pallets share each level. We assess the beam pair and frame separately, then align the load plaques with the selected configuration." } }, { "@type": "Question", "name": "Which rack type suits long parts?", "acceptedAnswer": { "@type": "Answer", "text": "Consider cantilever storage when the material requires support along its length rather than a pallet footprint. Share bundle dimensions and bearing locations so arm placement can be evaluated." } }, { "@type": "Question", "name": "What changes the project cost?", "acceptedAnswer": { "@type": "Answer", "text": "The position count, rack height, beam capacity, decking, freight, and installation all influence the quote. Your measurements and a CAD layout help define the scope before an itemized proposal is prepared. Send the pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote for your Liberty operation." } } ] } ] ```