--- title: "Pallet Racks in Statesville, NC | Greensboro Rack" url: https://greensboropalletrack.com/service-area/statesville description: "New pallet racks for Statesville distribution. Compare selective access and pushback lanes with your lift truck in a free layout and quote." lang: en --- Image: Pallet rack systems arranged for warehouse storage (https://greensboropalletrack.com/assets/hero-warehouse-UDtk90RH.jpg) Greensboro Pallet Rack (https://greensboropalletrack.com/products) # Pallet Racks in Statesville, NC Pallet racks in Statesville, NC should keep mixed orders accessible while grouping repeated reserve stock. I-77, I-40 and Meacham Road connect interstate distribution with legacy buildings at 18–24-foot clear heights. (336) 594-4387: 3365944387 ## Selective pallet racks for varied demand in Statesville Pallet racks in Statesville, NC should separate the access needs of mixed products from the density potential of repeated reserve inventory. Greensboro Pallet Rack supplies new warehouse pallet racks for layouts based on the loads you hold and the sequence in which they leave. Begin with pallet dimensions, maximum weights, and quantities per product rather than a target bay count. That range makes an actual height survey useful before specifying frames. The storage plan should fit the building and equipment together instead of repeating the same rack elevation across different rooms. Selective pallet racks keep individual loads available when the next order may require any product in the assortment. Allocate bays by loaded pallet dimensions and the quantity normally held for each item. The standard starting combination of a forty-two-inch frame and forty-eight-inch pallet still needs confirmation against the base support. Ninety-six-inch beams can suit two forty-inch pallets where weight and placement clearances allow, while one-hundred-forty-four-inch beams can serve three. A longer level needs a capacity selected for the combined load, not merely a count of the pallets it can physically span. Show outsize loads separately so they do not consume access space intended for an adjacent position or require an unplanned support method. For your Statesville layout, compare pallet rack systems (https://greensboropalletrack.com/products/pallet-rack), pushback rack (https://greensboropalletrack.com/products/pushback-rack) and pallet flow rack (https://greensboropalletrack.com/products/pallet-flow-rack), with your Statesville move supported by our warehouse relocation service (https://greensboropalletrack.com/warehouse-relocation). ## Push back racking system for reserve depth A push back racking system stores pallets in a last-in, first-out sequence and can be configured two to six deep. Evaluate that sequence against the way each product is shipped or consumed. A lane should have a clear product assignment and enough repeated inventory to make its depth useful. Avoid filling behind an accessible pallet with unrelated items simply because space is available. Document pallet base details, loaded dimensions, and weight variation before system selection. Compare the deepest arrangement with shallower alternatives using normal inventory quantities rather than an exceptional peak. Products requiring independent access or a different rotation pattern can remain in another storage area rather than compromising the handling method of the lane. ## Choose a layout from measured alternatives Your measurements and CAD planning can show how selective rows and reserve lanes compete for space without hiding the aisles needed to operate them. Use the truck’s actual working requirements for aisle width and check its approach at the ends of rows. Compare alternatives with the same pallet weights and dimensions so extra positions do not come from reduced handling allowances. An itemized quote should state new material, decking, freight, and installation as defined parts of the scope. Experienced installation crews we schedule and manage perform the agreed installation. Timing is confirmed in the quote once the configuration is settled. Retain the final drawing as the reference for later additions rather than treating a preliminary sketch as the installed equipment record. ## Industrial warehouse racking with matched ratings Industrial warehouse racking needs beam-pair and frame capacities that both suit the proposed loading plan. Start with the heaviest pallet combination on a level and identify the intended vertical spacing. Upright capacity depends on that spacing as well as frame height, so beam ratings cannot establish the capacity of the whole assembly. Verify that the forklift can handle the load at the upper elevation, allowing for actual loaded height and placement. Decking should be reviewed as part of support selection, not appended without its loading requirements. Specify plaques for the approved capacity and keep the elevation drawing with the equipment information. Future changes to beam positions should trigger a fresh review of the affected arrangement. Review the pallet rack systems for Statesville with the actual truck and load schedule. Moving inventory beyond Statesville? Compare our service areas (https://greensboropalletrack.com/service-area) and arrange warehouse moving services (https://greensboropalletrack.com/warehouse-relocation) with the receiving schedule for your Statesville operation. ## Pallet Rack Questions for Statesville ### Which products belong in pushback lanes? ### How much aisle space is necessary? ### Does a taller frame automatically add capacity? ## Pallet Rack Systems for Your Inventory ### Pallet Rack Direct access to each pallet for mixed SKUs. Beam pairs and frames sized to your heaviest load. https://greensboropalletrack.com/products/pallet-rack ### Pushback Rack Two-to-six-deep LIFO lanes for repeat pallets of a SKU, served from one working aisle. https://greensboropalletrack.com/products/pushback-rack ### Pallet Flow Rack FIFO pallet lanes with separate loading and picking faces for dated inventory. https://greensboropalletrack.com/products/pallet-flow-rack ### Drive In Rack Deep lanes for bulk inventory with few SKUs. Lane clearance matched to pallets and lift trucks. https://greensboropalletrack.com/products/drive-in-rack ### Cantilever Rack Open-front storage for lumber, pipe and long materials. Arms sized for load length and weight. https://greensboropalletrack.com/products/cantilever-rack ### Carton Flow Rack Gravity-fed case picking with replenishment from the rear and cartons presented at the pick face. https://greensboropalletrack.com/products/carton-flow-rack ## Plan Your Statesville Rack Layout Send your pallet sizes, loads and clear height for a free CAD layout and itemized quote. (336) 594-4387: 3365944387 Call Now: 3365944387 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://greensboropalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://greensboropalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Statesville", "item": "https://greensboropalletrack.com/service-area/statesville" } ] }, { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://greensboropalletrack.com/#business", "name": "Greensboro Pallet Rack", "alternateName": "Greensboro Pallet Rack — A Division of Warehouse Equipment & Supplies Co.", "url": "https://greensboropalletrack.com", "telephone": "(336) 594-4387", "hasMap": "https://maps.google.com/maps?q=7800%20Airport%20Center%20Dr%2C%20Unit%20E%2C%20Greensboro%2C%20NC%2027409&z=17&iwloc=A&output=embed", "address": { "@type": "PostalAddress", "streetAddress": "7800 Airport Center Dr, Unit E", "addressLocality": "Greensboro", "addressRegion": "NC", "postalCode": "27409", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "High Point, NC" }, { "@type": "City", "name": "Winston-Salem, NC" }, { "@type": "City", "name": "Kernersville, NC" }, { "@type": "City", "name": "Burlington, NC" }, { "@type": "City", "name": "Mebane, NC" }, { "@type": "City", "name": "Colfax, NC" }, { "@type": "City", "name": "McLeansville, NC" }, { "@type": "City", "name": "Graham, NC" }, { "@type": "City", "name": "Thomasville, NC" }, { "@type": "City", "name": "Lexington, NC" }, { "@type": "City", "name": "Asheboro, NC" }, { "@type": "City", "name": "Archdale, NC" }, { "@type": "City", "name": "Reidsville, NC" }, { "@type": "City", "name": "Liberty, NC" }, { "@type": "City", "name": "Rural Hall, NC" }, { "@type": "City", "name": "Clemmons, NC" }, { "@type": "City", "name": "Mocksville, NC" }, { "@type": "City", "name": "Salisbury, NC" }, { "@type": "City", "name": "Durham, NC" }, { "@type": "City", "name": "Hillsborough, NC" }, { "@type": "City", "name": "Danville, VA" }, { "@type": "City", "name": "Martinsville, VA" }, { "@type": "City", "name": "Eden, NC" }, { "@type": "City", "name": "Statesville, NC" }, { "@type": "City", "name": "Siler City, NC" } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Which products belong in pushback lanes?", "acceptedAnswer": { "@type": "Answer", "text": "Products held in repeated pallets that can follow last-in, first-out retrieval are candidates. Match lane depth to normal quantities and keep goods needing a different access sequence in another arrangement." } }, { "@type": "Question", "name": "How much aisle space is necessary?", "acceptedAnswer": { "@type": "Answer", "text": "That depends on the actual lift equipment and its loaded movements. Counterbalance, reach, and very narrow aisle trucks have different requirements, so provide the model before finalizing the space between rows." } }, { "@type": "Question", "name": "Does a taller frame automatically add capacity?", "acceptedAnswer": { "@type": "Answer", "text": "No. Useful levels depend on load height and truck capability, while frame capacity also depends on beam spacing. Any taller proposal needs a coordinated elevation and loading review before its position count is accepted." } } ] } ] ```